It is an ink appropriate of watery base for the impression of synthetic fabrics on clear funds.

Soft tact
Cured to the air.
Good solidity to the laundry.
Brilliant Colours.


Polyester/ Cotton.
Polyester.
Polyamide.
Lycra.
Acrylic.

The ink cures to the air at the 72 hours of printed, in climates with excessive humidity the time can be extended.
With the addition of 2% of Catalyst A, the ink cures to the air at the 48 hours. Once blended the catalyst, the ink has an useful life of 48 hours.
If an excellent washable is required in an immediate form it is recommended to cure it at 130ºC, during 3 minutes with hot air.

Mesh: 62 to 100 threads / cm monofilament.
Stencil: Resistant emulsions are recommended to the water.
Squeegee (spatula): 65 to 75 shore.

All the elements used in the impression can be washed immediately with water after being used if it was necessary clean the mesh with Agent of Cleaning CM and rinse with abundant water.

Retardant: If you want to slow the drying of the ink in the wing, add from 3% to 5%, low agitation.
Thickening Substance: Add from 0,3% to 0,5% to increase the viscosity.
Flux: Product recommended to lower the viscosity of the inks use it until 5% low agitation.
Catalyst: Use it until 2% to shorten the time of cured and to improve the solidities to the laundry.
Wax: Recommended to eliminate the sticky tact in the inks with watery base.

The Transparent Base (clear) can be pigmented with watery dispersions of pigments, using until 5%, the mixture should be uniform. To this ink it can be incorporated between 10% and 15% of Luminscent powder or glitter. The transparent bases, also, offer in range of 20 colors and 4 fluorescent.

Warning:
This technical information is orientative only. Color Mixing Argentina SA or any subsidiary or related company assumes no liability or responsability for any unproper or unauthorized use of any of our products. It is strongly recommended to test the products prior to use in order to evaluate your satisfaction.