It is an ink of watery base for the impression of cotton fabrics and its mixtures, on clear and dark funds.

Soft tact
Good power of covering
Elastic movie
Finish semi-opaque
Cured to the air
Excellent solidity to the laundry.

Cotton
Cotton /mix with synthetics fibers (until with a 30% of synthetic fiber).

1) The ink cures to the air at the 72 hours of printed, in climates with excessive humidity the time can be extended.
2) With the addition of 2% of Catalyst A , the ink cures to the air at the 24 hours.
3) If you want an excellent washable in an immediate form it is recommended to cure it at 140° during 3 minutes, with hot air or iron.

Mesh:32 to 62 threads/cm monofilament.
Photo emulsions: It is recommended resistant direct emulsions to the water.
Squeegee(spatulas):65 to 75 shore.

All the elements used in the impression should wash themselves immediately with cold water. To accelerate the process of cleaning they can be used some of our products of G&B cleaning.

Retardant: If you want to slow the drying of the ink in the wing, add from 3 to 5% of Retardant CM low agitation.
Thickening Substance: You can add from 0,3 to 0,5% to increase the viscosity, in low intense agitation.
Flux: Appropriate product to lower the viscosity of the inks, use it until 5%.
Catalyst A: use it until 2% to shorten the time of curing and to increase the solidity.

Warning:
This technical information is orientative only. Color Mixing Argentina SA or any subsidiary or related company assumes no liability or responsability for any unproper or unauthorized use of any of our products. It is strongly recommended to test the products prior to use in order to evaluate your satisfaction.