These Plastisoles possesses an excellent effect fluorescent, great cleaning and shine in the colours. Its opacity is half and when it should be printed on dark funds it is advisable to place a white base before. They can be used in manual impression as in automatic.

Soft tact
Cured to low temperatures
Express drying in the flash
Brilliant Colours

Cotton
Cotton /mix
Some synthetic fibers

It cures at 145°-165° C, the time depends on the oven type and the thickness of the printed ink. It can be treated with ovens to gas, infrared and infrared for convection, the oven type to be used and the thickness of the impression modifies the time of cured, it is for this reason that is recommended to make previous rehearsals to the production to adjust the temperature and appropriate times to each impression. Later on make the rehearsals of cured necessary.

Mesh: 34 to 110 threads/cm monofilament of high tension, low elongation.
Photo emulsions: To use direct emulsions or capillary film, resistant Diazo to the solvents, Diazo / photopolymer or photopolymer.
Squeegee(spatula): Polyurethane 65 - 80 shore.
Tension of the meshes: tensions nor under 23 newtons

All the elements used in the impression can be cleaned with our line of G&B Removers of Ink , they are ecological, biodegradable, not toxic and they are rinsed with cold water.

Soft base: You can use to reduce the viscosity of the inks and to give them a softer tact .
Transparent Base 9050,9070,9080: they are transparent and semi-transparent Bases that are used to reduce the color and to stretch the inks.
Co polyamide: additive to be used when synthetic fibers of difficult anchorage are printed. Add to the ink between 2% and 5%.

Warning:
This technical information is orientative only. Color Mixing Argentina SA or any subsidiary or related company assumes no liability or responsability for any unproper or unauthorized use of any of our products. It is strongly recommended to test the products prior to use in order to evaluate your satisfaction.