These Plastisoles are manufactured with pure and transparent pigments to be able to produce designs four-chromatics on white funds, in cotton fabrics, cotton /mix and some synthetic fibers.
They are developed for the wet direct impression on wet, they can also be used on funds means and dark prefixing them a covering base.

Excellent transparency.
High concentration of pigments.
Brilliant colours.
Soft tact.
Express drying in the flash.
Excellent solidity.
Low stickiness and accumulation of ink.

This is carried out to temperatures between 145°C and 165°C, it is important to keep in mind the deposit of ink on the fabric, since this modifies the time of exposition. This time it will vary according to the oven type that you utilize, a gas, infrared or for convection.
It is convenient to carry out previous rehearsals.

Mesh: 100-140 threads/cm. Monofilament polyester, high tension, low elongation.
The tension nor under 25 Newtons. It is recommended that all the wings have the same tension.
Photo emulsions: use direct emulsions, resistant Diazo to the solvents, Dual or Photopolymers.
Squeegee(spatula): Polyurethane 65-80 shore.

All the elements used in the impression can be cleaned with our line of Removers of Inks G&B, they are ecological, biodegradable, not toxic and they are rinsed with cold water.

Soft base: You can use to reduce the viscosity of the inks and to give him tact but soft.
Transparent base 9050,9070,9080: they are transparent and semi-transparent bases that are used to reduce the color and to stretch the inks.
Co polyamide: additive to be used when synthetic fibers of difficult anchorage are printed. Add to the ink between 2% and 5%.

Warning:
This technical information is orientative only. Color Mixing Argentina SA or any subsidiary or related company assumes no liability or responsability for any unproper or unauthorized use of any of our products. It is strongly recommended to test the products prior to use in order to evaluate your satisfaction.